Rollei Retro 80S 120 RR1801X

Rollei Retro 80S ISO 80/20 ° Superpanchromatic BW Film 120


  • 1400


  • superpancromatic medium speed b&w film.
  • special coating for an improvement of the transport properties of the cameras.
  • Optimal film flatness.
  • suitable for daylight and tungsten
  • Extended red sensitivity up to 750 nm, and therefore also capable for infrared photography.
  •  Very good tonality.
  • Very good maximal blackness.
  • Transparent = for scanning and as B&W slide film
  • Due to its very fine grain, its explicit detail rendering and its ability to be processed at low contrast, this film is producing low grain and very low noise when scanned.

Technical Info (Agfa)

Development Table

The emulsion is coated onto a transparent synthetic base providing excellent long-term and dimensional stability.

NOTE: Please insert and remove from the camera in subdued light.

Important handling notes for films with a synthetic film base:
The emulsion is coated onto a transparent synthetic base providing excellent long-term and dimensional stability.
This films has to be loaded in the camera and unloaded in subdued light. Before and after exposition always store the films in the black light-tight film-container. Not following these advices can cause light infiltration through the base material to the exposed pictures. Rollfilms: Please take care in handling the 120 size films in keeping the film-roll tight with two fingers after breaking the unexposed adhesive label to avoid that the film is rolling to "spring off". The same procedure should be followed after taking the roll film out of the camera. The exposed film should be kept compellingly again in the black light-tight rollfilm-container.

We Also Recommend